------------------------------------- KEYNOTE 1.7+a: File Format Specification Last updated: 6 Feb 2011 New elements added are marked with [ksr] ------------------------------------- ------------------------------------- KEYNOTE 1.7: File Format Specification Last updated: 30 November 2007 New elements added are marked with [dpv] ------------------------------------- ------------------------------------- KEYNOTE 1.x: File Format Specification Last updated: 12 June 2003 http://www.tranglos.com ------------------------------------- KeyNote uses plain text files which can be read on a line-by-line basis. RTF data is stored as-is, without any conversion. The file consists of a header section and a data section. The header identifies the file as a valid KeyNote file and stores some metainformation about the file, such as the date and time the file was created, which note was last active, user-defined description and comment, etc. The data section consists of subsections for notes and tree nodes. Sections and subsections are separated by special markers, described below. Almost all elements in the data section, where the properties of notes and tree nodes are stored, are optional. KeyNote fills in any missing data using default values. This applies even to names of notes. Default values are configured by user via Tools|Default settings. There is a bug, however, which prevents KeyNote from automatically assigning default names for tree nodes, so if a particular tree node has no name specified in the file its caption will be blank. Other than that, you can leave out all elements of a file. Only the markers are required, because they define the structure of the file. For tree nodes, the level number must also be specified, because it is required to re-create the tree hierarchy: level value indicates nesting, where level value of zero means top-level (root) node. Some elements or identifiers mentioned in this document may not appear in every KeyNote file. This is because some elements are only stored in the file if necessary. For instance, the file header carries information about the note which was used for clipboard capture. If clipboard capture was not enabled at the time the file was saved, this property is not stored in the header. (The example elements and properties shown in this document are based on a sample file "fileformat.knt", included in the package. The file contains one simple note with two lines of text, and one tree-type note with two normal nodes and one virtual node.) This document does not describe the structure of encrypted files, because this is closely tied to the encryption library used (DCPCrypt 1.0, by David Barton). Please see KeyNote source code to see how encrypted files are created and handled. Full KeyNote source code and other information is available at: http://www.tranglos.com/free/keynote.html http://sourceforge.net/projects/keynote/ Marek Jedlinski ------------------------------------- HEADER SECTION: Each line begins with '#', followed by a single character that identifies a header field. All header fields except for the first line are optional and will be auto-created if missing (KeyNote will use default values). The first line identifies the file as a valid KeyNote file and MUST be present. Lines not understood are simply ignored, as long as each line begins with the '#' character. Header ID - required; must not be changed. (1.0 was used for files that did not have tree-type notes.) #!GFKNT 2.0 Comment line, ignored # This is an automatically generated file. Do not edit. Optional: user-defined file description (single-line) (UTF8[ksr]) #/This is the optional description Optional: user-defined comment (single-line) (UTF8[ksr]) #?This is the optional comment Optional: Number of "active" note (zero-based) #$0 Optional: Date and time the file was created #C21-05-2003 15:24:50 Optional: File "Flags" string - see Notes, below. #^010000000000000000000000 Optional: icon file to use for tray icon (UTF8[ksr]) #Tc:\delphi\projects\keynote\img\alticon.ico Optional: external file where tab icons are stored (UTF8[ksr]) #Fc:\delphi\projects\keynote\alticons.icn Optional: if clipboard capture was active at the time the file was saved, this is the index of the note which was used for clipboard capture #L0 Optional: Note user defined default font name [ksr] (UTF8[ksr]) #NCourier Optional: Note user defined default font size [ksr] #Z8 Optional: Note user defined default font color [ksr] #RclWindowText Optional: Note user defined default bgcolor [ksr] #B$00DADADA Optional: Node user defined default font character name [ksr] (UTF8[ksr]) #nCourier Optional: Node user defined default font size [ksr] #z8 Optional: Node user defined default font color [ksr] #rclWindowText Optional: Node user defined default bgcolor [ksr] #b#00DADADA -------------------------------- SECTION (START AND END) MARKERS: The start of each subsection is marked by a single line. The first character in such lines is always the percent sign. For example, '%' marks the start of a new simple note, while '%+' marks the start of a tree-type note. Markers are as follows: % marks start of a new SIMPLE note %+ marks start of a TREE-TYPE note %- marks start of NODE in a tree-type note %: marks start of RTF data. Please see below for notes about the RTF data section. %% marks end of file (KeyNote stops reading the file here, but it will also stop at end of file, so this marker is not required, though always present in files generated by KeyNote.) No other markers are used. No end-of-section markers are used, except for end-of-file, above. -------------------------------- DATA SECTION: Each line begins with a 2-character identifier, possibly followed by equal sign (=) and data. For example, NN=title identifies the note name. Each line is guaranteed to be at least one character long. Each line with an identifier is guaranteed to be at least three characters long: the two characters of the identifier itself, plus the equal sign. (The file can be analyzed a little faster if we don't have to check for zero-length strings.) Note name (UTF8[ksr]) NN=Simple note Unique note ID (integer, auto-created if missing) ID=2 Note icon index (index for the icon displayed on the note's tab) II=7 Date and time the note was created DC=21-05-2003 15:25:25 Index of the note's tab (i.e., the order of the node) TI=0 Tab size (as defined by user in Note Properties) TS=4 Caret position (SelStart, zero-based) CX=67 Selection length (SelLength; 0 if no text is selected) CY=0 Note background color BG=$00DADADA Default font character set for note CH=0 Default font color for note FC=clWindowText Default font name for note (UTF8[ksr]) FN=Courier New Default font size for note FS=12 Default language for note LN=1033 Default font style for note (can include strings: 'bold', 'italic', 'underline', 'strikeout') ST=bold italic Note Flags string (see Notes, below) FL=101110000000000000000000 Number of lines of text (not required, but allows KeyNote to pre-allocate memory, which somewhat improves the speed of loading data into the RTF editor) LC=2 RTF data marker, followed by RTF data until one of the following occurs: new note start, new tree node start, end of file. %: {\rtf1\ansi\ansicpg1250\deff0\deflang1045{\fonttbl{\f0\fnil\fcharset238{\*\fname Courier New;}Courier New CE;}{\f1\fnil\fcharset0 Courier New;}} {\*\generator Riched20 5.40.11.2210;}\viewkind4\uc1\pard\f0\fs24 This is the text of the simple note.\par This is another line of text.\par \lang1033\f1\par } New TREE NOTE starts: %+ Note name (UTF8[ksr]) NN=Tree note Unique note ID ID=1 Other identifiers already described above: II=7 DC=21-05-2003 15:24:50 TI=1 TS=4 CX=60 CY=0 BG=$00DADADA CH=0 FC=clWindowText FN=Courier New FS=12 LN=1033 ST= FL=101110000000210000000000 Index of currently selected tree node SN=0 Width of the tree panel, in pixels TW=187 Default name for new nodes (UTF8[ksr]) EN=New node Tree panel background color TB=clWindow Optional: Node Caption Text Attribute TT= New TREE NODE starts %- Node level (indicates nesting) LV=0 Node Caption (name) (UTF8[ksr]) ND=This is a node Unique node ID DI=1 Node flags string (see Notes, below) NF=000000000000000000000000 Background color for text of the node (editor, not tree color) BC=$00DADADA Optional: Date and time the node was created [ksr] HD=21-05-2003 15:25:25 Optional: Node Caption Text Attribute HT= Optional: Caret position (zero-based) SS=60 Optional: Node Caption image index (if "custom icons" are selected for the tree) IX=0 Optional: Alarm instant (New in 1.7.1) [dpv] NA=21-05-2007 15:24:50 Optional: relative path to file, if node is a virtual node (UTF8[ksr]) RV=todo.txt Optional: full absolute path to file, if node is a virtual node (see also node flags) (UTF8[ksr]) VF=c:\delphi\projects\keynote\doc\todo.txt RTF data follows: %: {\rtf1\ansi\deff0{\fonttbl{\f0\fnil\fcharset238{\*\fname Courier New;}Courier New CE;}{\f1\fnil\fcharset0 Courier New;}} {\*\generator Riched20 5.40.11.2210;}\viewkind4\uc1\pard\lang1045\f0\fs24 This is the text of the node.\par This is another line of text.\par \lang1033\f1\par } End of fie marker follows: %% ------------------------------------- NOTES: 1. About "flags" strings. Flags strings hold a number of boolean (yes/no) values, and, rarely, other types of values. Each value is encoded as a single character in the flags string. Boolean values are encoded as 0 (false) and 1 (true); for meaning of other values see flag descriptions below. Each flag string is exactly 24-characters long, and will be IGNORED if it is shorter. (That is, if the string is shorter than 24 characters, KeyNote will not read ANY values from the string.) Not all 24 values are used. There are three versions of the flags string: one for file, one for each note (with additional meanings for tree-type notes), and another one for every node in the file. The meanings of particular flags and values have changed with subsequent releases of KeyNote. Only the current values and meanings are described here - they are valid for KeyNote 1.6. If your file was created by an older version, the meaning of some flags may be different than described here. a) FILE FLAGS position type meaning 1 boolean Open file as read-only 2 boolean Show icons on tabs 3 boolean TRUE if file was saved using version 3.0 of the richedit control; otherwise FALSE 4 boolean TRUE if the multi-level backup setting (Tools|Options) should be IGNORED for this file; otherwise FALSE (i.e. perform multi-level backup if so configured) (other flags are unused) b) NOTE FLAGS - flags for simple notes: position type meaning ---------- -------------- -------------- 1 boolean Note is visible (UNUSED; could be used for hiding notes, but this has never been implemented) 2 boolean Note is read-only 3 boolean Word-wrap ON/OFF 4 boolean URL detection ON/OFF 5 boolean if TRUE, use true TAB character in this note; if FALSE, insert spaces instead of TAB character when user presses the TAB key 6 boolean if TRUE, note has the "Plain text only" setting enabled (Note properties|Advanced). IMPORTANT: This affects how RTF data is stored, see below. - additional flags for tree-type notes: position type meaning ---------- -------------- -------------- 13 integer Tree icons selector: 0 = No icons; 1 = Standard (default) icons; 2 = Custom icons 14 boolean Automatic node numbering ON/OFF (if TRUE, node number is automatically added to node name when node is created) 15 boolean Show checkboxes in tree ON/OFF 16 boolean TRUE = vertical tree layout; FALSE = horizontal tree layout 17 boolean TRUE = tree panel is hidden; FALSE = tree panel is visible 18 boolean TRUE = tree panel has focus; FALSE = editor panel has focus 19 boolean TRUE = Hide checked nodes; FALSE = All nodes are visible (New in 1.7.0) [dpv] c) NODE FLAGS position type meaning ---------- -------------- -------------- 1 boolean Check state: TRUE = node is checked; FALSE = node is unchecked 2 boolean Flag state (reserved for internal use; must be 0) 3 boolean (unused - obsolete) Bold state: TRUE = node caption is displayed in bold font; [ksr] FALSE = node caption is displayed in normal font style 4 boolean (unused - obsolete) 5 boolean (unused - obsolete) 6 integer Virtual node indicator: 0 = not a virtual node; 1 = virtual node with plain text data; 2 = virtual node with RTF data 7 boolean TRUE = node is expanded; FALSE = node is collapsed 8 boolean TRUE = node caption has its own font color; FALSE = node caption color is default 9 boolean TRUE = node caption has its own background color; (unused - obsolete) FALSE = node caption background color is default 10 integer Word wrap setting for node. Valid values are 0, 1 and 2. '0' = use the Note's wordwrap setting (for backwards compatibility); 1 = WordWrap ON; 2 = WordWrap OFF 11 boolean TRUE = Show children checkBoxes (New in 1.7.0) [dpv] FALSE= Hide children checkBoxes 12 boolean TRUE = Node is filtered (hidden) (New in 1.7.0) [dpv] FALSE= Node is not filtered (visile) 13 boolean TRUE = node has font name 14 boolean TRUE = node has font size 15 boolean TRUE = node has font style ------------------------------------- IMPORTANT NOTES about the RTF data section: 1. The data section may be empty or missing entirely, which will not invalidate the file. This allows you to easily create file templates without having to worry about supplying valid RTF data: your template can simply define the structure (notes and nodes), while leaving out the data sections, which users will fill in as they create files based on the template. 2. If the flags string for a note contains '1' at sixth position (see above), the note has been marked as "Plain text only" (Note properties|Advanced). When storing plain text data in the RTF data section, we could encounter lines which would be interpreted by KeyNote as section markers (i.e. if the note has a line that consists only of a percent sign, it would be interpreted as a start of a new note). This cannot happen in RTF data, because there will at least be a trailing backslash or "\par" token, but for plain-text data we MUST avoid the possibility of such conflicts. Therefore, if the note has been marked as plain-text, KeyNote prepends a semicolon (;) to each data line, like this: ;one line of text in a plain-text note ;another line of text. These semicolons must be stripped before displaying the text. Other than this, RTF data is stored without any changes whatsoever. --- END ---